Maintenance Tab - Hitachi Compute Blade 2000 User Manual

Maintenance tab

Using the Maintenance tab, you can update the firmware, backup and restore the
data managed on the firmware, and restart BMC.
 EFI Firmware Management
Only maintenance personnel can use this menu.
 BMC Firmware Management
You can update and switch BMC firmware on this screen.
The server blade has two banks (Bank0 and Bank1) of storage area for the BMC
firmware. If one BMC firmware fails, you can boot BMC using the other bank.
You can update the BMC firmware on this screen. BMC firmware is updated by
writing a new BMC firmware image to a bank (Alternate), which is not currently used,
then switching banks, and restarting BMC.
You can also switch banks on this screen without updating the BMC firmware.
#
1 Refresh
Base Firmware
2
SDR Version
3 Bank0
Item
Reloads the information.
Shows the information shared by Bank0 and
Bank1.
Base Firmware: shows the base firmware
version
SDR Version: shows the SDR version
Shows the Bank0 information.
Active: currently used.
Alternate: currently not used.
Bank Firmware: the firmware version written
120
Description