Remote Console Application (Java Application) - Hitachi Compute Blade 2000 User Manual

If you made no changes, select Save & Exit menu -- Discard Changes and
6
Exit to restart the server blade. If you changed any settings, select Save &
Exit menu -- Save Changes and Exit to restart the server blade. After the
server blade has restarted, the system will automatically start booting from the
remote CD/DVD.
Booting from a remote CD/DVD may fail if a

floppy disk has been inserted in the console
terminal's floppy disk drive. In this case, remove
the floppy disk and then restart the server blade.
Remove the CD/DVD driver media from the

console terminal after installation. When using
the remote console application (Reclient), select
Remote CD/DVD > End CD/DVD. When using
the remote FD, remove the media from the
console terminal FD drive and select Remote FD
> End FD on the remote console toolbar.
Remote Console Application (Java
application)
1 Insert the CD/DVD media into the console terminal's CD/DVD drive.
2 Start the Remote Console Application (Java application), and then select
Remote CD/DVD on the toolbar and Redirect CD/DVD.
161