Cam-Acl-Egress; Cam-Optimization - Dell Z9500 Reference Manual

cam-acl-egress

Allocate CAM for egress ACLs.
Z9500
Syntax
cam-acl-egress default | l2acl number ipv4acl number ipv6acl
number}
Parameters
default
l2acl number
ipv4acl number
ipv6acl number
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0

cam-optimization

Optimize CAM utilization for QoS Entries by minimizing require policy-map CAM space.
Z9500
Syntax
cam-optimization [qos]
Parameters
qos
Defaults Disabled.
Command CONFIGURATION
Modes
554
Reset egress CAM ACL entries to default settings.
Allocate space to each CAM region.
Enter the CAM profile name then the amount of CAM space
to be allotted. The total space allocated must equal 13. The
range for ipv4acl is from 1 to 4. The ipv6acl range must be a
factor of 2.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Optimize CAM usage for QoS.
Content Addressable Memory (CAM)