Deny Regex - Dell Z9500 Reference Manual

ASN:NNNN
IPADDR:NN
Defaults Not configured.
Command CONFIGURATION (conf-ext-community-list)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
7.8.1.0
7.7.1.0
7.6.1.0
Related
permit
Commands
show ip extcommunity-list

deny regex

This feature allows you to specify an extended community to reject (deny) using a regular expression
(regex).
Z9500
Syntax
deny regex {regex}
To remove, use the no deny regex {regex} command.
Parameters
regex
Defaults Not configured.
Command CONFIGURATION (conf-ext-community-list)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
466
Enter the 2-octet AS specific extended community number
in the format ASN:NNNN (2-byte AS number:4-byte
community value).
Enter the IP address specific extended community in the
format IPADDR:NN (4-byte IPv4 Unicast Address:2-byte
community value).
Description
Introduced on the Z9500.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— configures to add (permit) rules.
— displays the extended community list.
Enter a regular expression.
Border Gateway Protocol