Description - Dell Z9500 Reference Manual

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
7.5.1.0
6.3.1.0
Usage
When you use this command to redistribute routes into a routing domain, the
Information
router becomes an autonomous system (AS) boundary router. An AS boundary
router does not always generate a default route into a routing domain. The router
still requires its own default route before it can generate one.
How a metric value assigned to a default route advertises depends on the metric-
style command configuration. If the metric-style command is set for Narrow
mode and the metric value in the default-information originate command
is set to a number higher than 63, the metric value advertised in the LSPs is 63. If
the metric-style command is set for Wide mode, the metric value in the
default-information originate command is advertised.
Related
•
Commands
•
•
•

description

Enter a description of the IS-IS routing protocol.
Z9500
Syntax
description {description}
To remove the description, use the no description {description}
command.
1036
Description
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Added IPv6 ISIS support.
Introduced.
redistribute — redistributes routes from one routing domain to another routing
domain.
isis metric — configures a metric for an interface.
metric-style — sets the metric style for the router.
show isis database — displays the IS-IS link state database.
Intermediate System to Intermediate System (IS-IS)