Upgrade System - Dell Z9500 Reference Manual

Version
9.2(1.0)
9.0.0.0
Example
Dell# upgrade fpga-image system fpga booted
Current FPGA information in the system:
=======================================
Card
---------------------------------------------------------------
---------
CP
***************************************************************
********
* Warning - Upgrading FPGA is inherently risky and should
* only be attempted when necessary. A failure at this upgrade
may
* cause a board RMA. Proceed with caution !
***************************************************************
********
Upgrade FPGA image for system [yes/no]: yes
FPGA upgrade in progress!!! Please do NOT power off the unit
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Usage Do not restart the switch while an upgrade is progressing. Restarting the chassis
Information during an upgrade may corrupt critical boot components.
When an upgrade of FPGA devices successfully completes, the switch reloads
automatically.
Related
•
Commands

upgrade system

Upgrade the Dell Networking OS image on all Z9500 CPUs, including the Control Processor, Route
Processor, and line cards. To upgrade the bootflash or bootselector image, use the upgrade boot
command.
Z9500
Syntax
upgrade system {ftp: | scp: | tftp: | flash: | usbflash:} file-
url {A: |B:}
82
Description
Introduced on the Z9500.
Introduced on the Z-Series.
FPGA Name
FPGA 0x14
*
upgrade fpga-image linecard booted
line cards.
Current Version
0x13
— upgrades the FPGA devices in Z9500
New Version
*
*
File Management