Fip-Snooping Fc-Map; Fip-Snooping Port-Mode Fcf - Dell Z9500 Reference Manual

Usage The maximum number of FCFs supported per FIP snooping-enabled VLAN is four.
Information The maximum number of FIP snooping sessions supported per ENode server is 16.

fip-snooping fc-map

Configure the FC-MAP value FIP snooping uses on all VLANs.
Z9500
Syntax
fip-snooping fc-map fc-map-value
To return the configured FM-MAP value to the default value, use the no fip-
snooping fc-map command.
Parameters
fc-map-value
Defaults 0x0EFC00
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
8.3.19.0
8.3.12.0

fip-snooping port-mode fcf

Configure the port for bridge-to-FCF links.
Z9500
Syntax
fip-snooping port-mode fcf
To disable the bridge-to-FCF link on a port, use the no fip-snooping port-
mode fcf command.
FCoE Transit
Enter the FC-MAP value FIP snooping uses. The range is
from 0EFC00 to 0EFCFF.
CONFIGURATION
VLAN INTERFACE
Description
Introduced on the Z9500 and S6000-ON.
Introduced on the S4820T.
Introduced on the S4810.
741