Ip Dhcp Snooping Database - Dell Z9500 Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

ip dhcp snooping database

Delay writing the binding table for a specified time.

ip dhcp snooping database write-delay minutes

CONFIGURATION

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Dynamic Host Configuration Protocol (DHCP)

For a Gigabit Ethernet interface, enter the keyword

gigabitethernet.

For a Ten-Gigabit Ethernet interface, enter the keyword

tengigabitethernet.

For a 40-Gigabit Ethernet interface, enter the keyword

Enter the number of the interface.

Enter the keyword lease then the amount of time the IPv6

address are leased. The range is from 1 to 4294967295.

EXEC Privilege

Introduced on the S4810, S4820T, S6000 and Z-Series.

The range is from 5 to 21600.

Introduced on the Z9500.

Introduced on the S4820T.