Show Ip Dhcp Configuration - Dell Z9500 Reference Manual

DHCPNAK
Message
DHCPDISCOVER
DHCPREQUEST
DHCPDECLINE
DHCPRELEASE
DHCPREBIND
DHCPRENEW
DHCPINFORM

show ip dhcp configuration

Display the DHCP configuration.
Z9500
Syntax
show ip dhcp configuration [global | pool name]
Parameters
pool name
global
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
Example
Dell# show ip dhcp configuration global
Protocol status
Number of ping packets : 1
Dell#
Dell# show ip dhcp configuration
Pool Name
Pool Type
Domain Name
Lease Time
DNS Servers
Dynamic Host Configuration Protocol (DHCP)
0
Sent
53
9
0
6
0
0
0
Display the configuration for a DHCP pool.
Display the DHCP configuration for the entire system.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
: Enabled
: p1
: Dynamic
: dell.com
: 2Days 0Hrs 0Mins
: 10.11.0.1
pool p1
689