Show Arp Retries - Dell Z9500 Reference Manual

Description
Total Entries
Static Entries
Dynamic Entries
CPU
Example
#show arp summary
(Summary)
TotalEntries Static Entries Dynamic Entries CPU
----------------------------------------------
83
Dell
Related
ip local-proxy-arp
Commands
switchport mode private-vlan

show arp retries

Display the configured number of ARP retries.
Z9500
Syntax
show arp retries
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.1.0
Related
arp retries
Commands
ARP reply in response to an ARP request.
932
Lists the total number of ARP entries in the ARP table.
Lists the total number of configured or static ARP entries.
Lists the total number of learned or dynamic ARP entries.
Lists which CPU the entries are stored on.
0
— enables/disables Layer 3 communication in secondary VLANs.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced.
— sets the number of ARP retries in case the system does not receive an
83
— sets PVLAN mode of the selected port.
CP
IPv4 Routing