Common Mac Acl Commands; Clear Counters Mac Access-Group - Dell Z9500 Reference Manual

description Acl Vlan Group1
member vlan 1-10,400-410,500
ip access-group acl1 out implicit-permit
!
acl-vlan-group group2
member vlan 20
ip access-group acl2 out
Dell#
Dell#show running-config acl-vlan-group group1
!
acl-vlan-group group1
description Acl Vlan Group1
member vlan 1-10,400-410,500
ip access-group acl1 out implicit-permit

Common MAC ACL Commands

The following commands are available within both MAC ACL modes (Standard and Extended) and do not
have mode-specific options. These commands allow you to clear, display, and assign MAC ACL
configurations.
The Z9500 supports both Ingress and Egress MAC ACLs.
You can apply a MAC ACL on physical, port-channel and VLAN interfaces. The permit/deny statements in
the ACL determine how traffic on an interface, VLAN members, or port-channel members is handled.

clear counters mac access-group

Clear counters for all or a specific MAC ACL.
Z9500
Syntax
clear counters mac access-group [mac-list-name]
Parameters
mac-list-name
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
262
(OPTIONAL) Enter the name of a configured MAC access list.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Access Control Lists (ACL)