Neighbor Default-Originate; Neighbor Description - Dell Z9500 Reference Manual

neighbor default-originate

Inject the default route to a BGP peer or neighbor.
Z9500
Syntax
neighbor {ipv6-address | peer-group-name} default-originate
[route-map map-name]
To remove a default route, use the no neighbor {ipv6-address | peer-
group-name} default-originate [route-map map-name] command.
Parameters
ipv6-address
peer-group-
name
route-map
map-name
Defaults Not configured.
Command ROUTER BGPV6-ADDRESS FAMILY
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
Usage If you apply a route map to a BGP peer or neighbor with the neighbor default-
Information
originate command configured, the software does not apply the set filters in the
route map to that BGP peer or neighbor.

neighbor description

Assign a character string describing the neighbor or group of neighbors (peer group).
Z9500
Syntax
neighbor {ipv6-address | peer-group-name} description text
To delete a description, use the no neighbor {ipv6-address | peer-group-
name} description text command.
Parameters
ipv6-address
512
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
(OPTIONAL) Enter the keywords route-map followed by the
name of a configured route map.
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Enter the IPv6 address in the x:x:x:x::x format.
Border Gateway Protocol