Bgp Log-Neighbor-Changes; Bgp Non-Deterministic-Med - Dell Z9500 Reference Manual

Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
Usage This feature is advertised to BGP neighbors through a capability advertisement. In
Information Receiver Only mode, BGP saves the advertised routes of peers that support this
capability when they restart.

bgp log-neighbor-changes

Enable logging of BGP neighbor resets.
Z9500
Syntax
bgp log-neighbor-changes
To disable logging, use the no bgp log-neighbor-changes command.
Defaults Enabled.
Command ROUTER BGP
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
Usage The bgp log-neighbor-changes command appears in the show config
Information
command output.
Related show config
Commands

bgp non-deterministic-med

Compare MEDs of paths from different autonomous systems.
Z9500
Syntax
bgp non-deterministic-med
To return to the default, use the no bgp non-deterministic-med command.
Defaults Disabled (that is, paths/routes for the same destination but from different ASs do
not have their MEDs compared).
Border Gateway Protocol
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
– views the current configuration.
489