Show Version - Dell Z9500 Reference Manual

boot system gateway 1.1.1.1
!
...
Related show running-config
Commands

show version

Display the current Dell Networking OS version information on the system.
Z9500
Syntax
show version
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
9.0.0.0
8.3.19.0
8.3.12.0
7.6.1.0
7.5.1.0
E-Series
Example
Dell#show version
Dell Force10 Real Time Operating System Software
Dell Force10 Operating System Version: 2.0
Dell Force10 Application Software Version: 9.2(1.0B5)
Copyright (c) 1999-2013 by Dell Inc. All Rights Reserved.
Build Time: Sat Mar 15 09:02:21 PDT 2014
Build Path: /work.local/build/toolSpaces/tools05/E9-2-1/SW/SRC
Force10 uptime is 15 minute(s)
System image file is "pt-z9500-5"
System Type: Z9500
Control Processor: Intel Centerton with 3 Gbytes (3203928064
bytes) of memory, cores(s) 1.
16G bytes of boot flash memory.
File Management
– displays the current (running) configuration.
Description
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the S-Series
Introduced on the C-Series.
Original command.
1 36-port TE/FG (ZC)
75