Dell Z9500 Reference Manual page 836

Command
•
Modes
•
Command
Version
History
9.7(0.0)
9.0.2.0
9.2(0.2)
9.1(0.0)
8.3.12.1
8.3.11.4
8.3.11.1
8.5.1.0
8.3.7.0
8.2.1.2
8.2.1.0
8.1.1.0
7.8.1.0
7.6.1.0
7.5.1.0
6.4.1.0
6.3.1.0
836
• For a port channel interface, enter the keywords port-
channel then a number. The range is from 1 to 512.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
• For a tunnel interface, enter the keyword tunnel then
the tunnel ID. The range is from 1 to 16383.
EXEC
EXEC Privilege
Description
Introduced on the S6000-ON.
Introduced on the S6000.
Added support for the tunnel interface type.
Updated Management Ethernet output to include two
global IPv6 addresses on S4810 and Z9000 and added
output example showing OpenFlow instance ID.
Updated command output to support multiple IPv6
addresses on S4810.
Output expanded to support eSR4 optics in Z9000.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Included SFP and SFP+ optics power detail in the E-Series
and C-Series output.
Added support for 4093 VLANs on the E-Series ExaScale.
Prior releases supported 2094.
Introduced on the E-Series ExaScale.
Output expanded to include SFP+ media on the C-Series.
Introduced on the S Series.
Introduced on the C-Series.
Changed the organization of the display output.
Added the Pluggable Media Type field in the E-Series
TeraScale output.
Interfaces