Member Vlan (Acl Vlan Group); Show Acl-Vlan-Group - Dell Z9500 Reference Manual

Usage You can apply only an egress IP ACL on an ACL VLAN group.
Information

member vlan (ACL VLAN Group)

Add VLAN members to an ACL VLAN group.
Syntax
member vlan {VLAN-range}
Parameters
VLAN-range
Default None
Command ACL-VLAN-GROUP CONFIGURATION (conf-acl-vl-grp)
Modes
Command
Version
History
9.5(0.0)
9.3(0.0)
Usage At a maximum, there can be only 32 VLAN members in all ACL VLAN groups. A
Information VLAN can belong to only one ACL VLAN group at a time.
You can create an ACL VLAN group and attach the ACL with the VLAN members.
The optimization is applicable only when you create an ACL VLAN group. If you
apply an ACL separately on the VLAN interface, each ACL has a mapping with the
VLAN and increased CAM space utilization occurs.
Attaching an ACL individually to VLAN interfaces is similar to the behavior of ACL-
VLAN mapping storage in CAM prior to the implementation of the ACL VLAN group
functionality.

show acl-vlan-group

Display the configured ACL VLAN groups on the switch.
Syntax
show acl-vlan-group {group-name | detail}
Parameters
group-name
Access Control Lists (ACL)
Enter the member VLANs using comma-separated VLAN IDs,
a range of VLAN IDs, a single VLAN ID, or a combination. For
example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Description
Introduced on the Z9500.
Introduced on the S4810, S4820T, and Z9000.
Display the configuration of an ACL VLAN group.
255