Dell Z9500 Reference Manual page 134

Defaults Display interface statistics from all Z9500 CPUs.
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
7.6.1.0
7.5.1.0
6.2.1.1
Usage Traffic statistics are sorted on a per-interface basis; the interface receiving the most
Information traffic is displayed first. All CPU and port information is displayed unless a specific
port or CPU is specified. Traffic information is displayed for router ports only; not
for management interfaces.
Example
Dell#show cpu-traffic-stats cp
-- Partybus ethernet statistics --
Link state
Recv Interrupts/Polls:
Recv Packets
590000
Recv Desc Error
Error :
Recv Out of Mem
Mem :
Recv Upper Layer Full:
Pkts :
Recv Other Error
Error:
Recv Restarts
Recv Restarts Fatal
-- Dataplane ethernet statistics --
bc pci driver statistics for device:
rxHandle
noMhdr
noMbuf
noClus
recvd
dropped
recvToNet
rxError
rxDatapathErr
rxPkt(COS0)
rxPkt(COS1)
134
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the S-Series.
Introduced on the C-Series
Introduced on the E-Series.
: Up
0
: 2027080
: 0
0
: 0
0
0
0
: 0
0
: 0
: 0
:0
:0
:0
:0
:0
:0
:0
:0
:0
:0
:0
Transmit Packets
Transmit Desc
Transmit Out of
Transmit Pause
Transmit Other
Control and Monitoring
: