Dell Z9500 Reference Manual page 876

hg-stats {port
hg-port-
number | unit
npu-id port hg-
port-number}
Defaults none
Command
•
Modes
•
Command
Version
History
9.2.1.0
9.3.0.0
Example (Line-
Dell# show hardware linecard 0 hg-stats unit 0 port 59
card HiGig
Higig Port Statistics:
HiGigabitEthernet 0/0/59,
Port)
Input Statistics:
byte pkts
Output Statistics:
byte pkts
byte pkts
Rate info (interval 15 seconds):
line-rate
line-rate
Example (SFM
Dell# show hardware sfm 5 hg-stats port 19
HiGig Port)
Higig Port Statistics:
HiGigabitEthernet 3/5/19,
Input Statistics:
byte pkts
876
Enter the keyword hg-stats to display HiGig port statistics.
For an SFM NPU HiGig link bundle, specify only a HiGig port
number. Valid SFM hg-port-number values are 1 to 22.
For a line-card NPU HiGig link bundle, specify an NPU ID and
a HiGig port number. Line-card NPUs range from 0 to 3.
Line-card HiGig port numbers range from 50 to 61.
EXEC
EXEC Privilege
Description
Introduced on the Z9500 switch.
Added support for the hg-stats option on the Z9000
platform.
0 packets, 0 bytes
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-
0 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
1566541600 packets, 125323328000 bytes 0 underruns
0 64-byte pkts, 1566541600 over 64-byte pkts, 0 over 127-
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-
0 Multicasts, 0 Broadcasts 1566541600 Unicasts
0 throttles, 0 discarded, 0 collisions 0 wredDrops
Input 00.00 Mbits/sec,
Output 00.00 Mbits/sec,
0 packets, 0 bytes
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-
0 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
0 packets/sec, 0.00% of
0 packets/sec, 0.00% of
Interfaces