Show Gvrp - Dell Z9500 Reference Manual

LeaveAll Timer
Dell#
Related garp timers
Commands

show gvrp

Display the GVRP configuration.
Z9500
Syntax
show gvrp [brief | interface]
Parameters
brief
interface
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
772
10000
— sets the intervals (in milliseconds) for sending GARP messages.
(OPTIONAL) Enter the keyword brief to display a brief
summary of the GVRP configuration.
(OPTIONAL) Enter the following keywords and slot/port or
number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel then a number. The range is from 1 to 512.
EXEC
EXEC Privilege
Description
Introduced on the S6000–ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on C-Series, E-Series, and S-Series
GARP VLAN Registration (GVRP)