Ip Community-List; Show Ip Community-Lists - Dell Z9500 Reference Manual

ip community-list

Enter COMMUNITY-LIST mode and create an IP community-list for BGP.
Z9500
Syntax
ip community-list comm-list-name
To delete a community-list, use the no ip community-list comm-list-name
command.
Parameters
comm-list-
name
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.8.1.0
6.1.1.0
Example
Dell(conf)#ip community-list TestComList
Dell(config-community-list)#

show ip community-lists

Display configured IP community lists in alphabetic order.
Z9500
Syntax
show ip community-lists [name]
Parameters
name
Access Control Lists (ACL)
Enter a text string as the name of the community-list, up to
140 characters.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names are up to 16 characters long.
Introduced on the E-Series.
(OPTIONAL) Enter the name of the standard or extended IP
community list, up to 140 characters.
321