Network; Pool - Dell Z9500 Reference Manual

Version
8.3.7.0
8.2.1.0

network

Specify the range of addresses in an address pool.
Z9500
Syntax
network network /prefix-length
Parameters
network/
prefix-length
Defaults none
Command DHCP <POOL>
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0

pool

Create an address pool.
Z9500
Syntax
pool name
Parameters
name
Defaults none
Command DHCP
Modes
Dynamic Host Configuration Protocol (DHCP)
Description
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Specify a range of addresses. Prefix-length range is from 17
to 31.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Enter the address pool's identifying name.
687