Restore Factory-Defaults - Dell Z9500 Reference Manual

restore factory-defaults

Restore factory defaults on a switch.
Syntax
restore factory-defaults {clear-all | nvram}
Parameters
factory-
defaults
clear-all
nvram
Command EXEC Privilege
Modes
Command
Version
History
9.2(1.0)
8.3.17.1
Usage
Restoring factory defaults deletes the existing startup configuration and all
Information
persistent settings (stacking, fanout, and so forth).
When restoring factory default settings, a switch remains in standalone mode after
the restoration. After the restore is complete, the units power cycle immediately.
Example
Dell# restore factory-defaults clear-all
***************************************************************
********
existing
fanout, etc.)*
immediately.
caution !
***************************************************************
********
64
CAUTION: This command deletes all files, including the startup
configuration file. So, after executing this command, consider saving the
running config as the startup config (use the write memory command or
copy run start command).
Return the switch to its factory-default settings.
Enter the keywords clear-all to reset the NvRAM and the
system startup configuration.
Enter the keyword nvram to reset the NvRAM only.
Description
Introduced on the Z9500.
Supported on the M I/O Aggregator.
CAUTION: There is no undo for this command.
* Warning - Restoring factory defaults will delete the
*
* startup-config and all persistent settings (stacking,
* After restoration the unit(s) will be powercycled
*
* Proceed with
*
File Management