Version
9.7(0.0)
show interface ets
Displays the ETS configuration applied to egress traffic on an interface, including priority groups with
priorities and bandwidth allocation.
Syntax
show interface port-type fortyGigE/tenGigE X/x ets detail
Parameters
interface
detail
Command
EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
Usage
Information
Example
(Summary)
Example
(Detail)
Dell#show interface fortyGigE 0/36 ets detail
Interface fortyGigE 0/36
Max Supported PG is 4
Number of Traffic Classes is 8
Admin mode is on
Admin Parameters :
------------------
Admin is enabled
PG-grp
BW-PEAK
Rate(Mpbs) Burst(KB)
---------------------------------------------------------------
-------------------
0
4000
1
-
2
-
Data Center Bridging (DCB)
Description
Introduced on the Z9500.
Enter the port-type which can be ten GigE or forty GigE and
port ETS information.
Enter key details for a full list of results.
Description
Introduced on the Z9500.
NOTE: Please note that the show interface ets detailsare updated
with Minimum and Maximum bandwidth details.
Priority#
TSA
0,1,2,4,5,6,7
400
ETS
3
-
ETS
-
-
BW-%
BW-COMMITTED
%
Rate(Mbps) Burst(KB)
50
400
50
-
-
-
100
-
-
587