Show Interfaces Status - Dell Z9500 Reference Manual

show interfaces status

To display status information on a specific interface only, display a summary of interface information or
specify a stack-unit slot and interface.
Z9500
Syntax
show interfaces [interface | linecard slot-number] status
Parameters
interface
linecard slot-
number
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.5.1.0
8.1.1.0
7.6.1.0
848
(OPTIONAL) Enter one of the following keywords and slot/
port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a Loopback interface, enter the keyword loopback
then the slot/port information. The range is from 0 to
16383.
• For a port channel interface, enter the keywords port-
channel then a number. The range is from 1 to 512.
(OPTIONAL) Enter the keyword linecard then the slot
number.
EXEC
EXEC Privilege
Description
Introduced on the S6000-ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Interfaces