Terminal Length; Traceroute - Dell Z9500 Reference Manual

terminal length

Configure the number of lines displayed on the terminal screen.
Z9500
Syntax
terminal length screen-length
Parameters
screen-length
Defaults 24 lines
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
E-Series

traceroute

View a packet's path to a specific device.
Z9500
Syntax
traceroute {host | vrf instance | ip-address | ipv6-address}
Parameters
host
vrf instance
172
Enter a number of lines. Entering zero causes the terminal to
display without pausing. The range is from 0 to 512.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command.
Enter the name of device.
(Optional) E-Series Only: Enter the keyword vrf then the
VRF Instance name.
Control and Monitoring