Show Command-History - Dell Z9500 Reference Manual

300
LLC:0, SNAP:0, IP:300, ARP:0, other:0
Unicast:300, Multicast:0, Broadcast:0
Processor : RP2
---------------
No CPU traffic statistics.
Dell#
Related debug cpu-traffic-stats
Commands

show command-history

Display a buffered log of all commands all users enter along with a time stamp.
Z9500
Syntax
show command-history
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
8.1.1.0
7.6.1.0
7.5.1.0
Usage One trace log message is generated for each command. No password information
Information is saved to this file. A command-history trace log is saved to a file after an RPM
failover. Dell Networking TAC analyzes this file to help identify the root cause of an
RPM failover.
Example
Dell#show command-history
[11/20 15:47:22]: CMD-(CLI):[service password-encryption]by
default from console
[11/20 15:47:22]: CMD-(CLI):[service password-encryption
128
— enables CPU traffic statistics for debugging.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
Control and Monitoring