Dell Z9500 Reference Manual page 200

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.12.0
8.3.11.1
8.4.2.1
7.6.1.0
Usage
If you enable 802.1X multi-supplicant authentication on a port, additional 802.1X
Information
configuration details (Port Authentication status, Untagged VLAN ID, Authentication
PAE state, and Backend state) are displayed for each supplicant, as shown in the
following example.
Example
Dell#show dot1x int tengig 2/32
802.1x information on Te 2/32:
-----------------------------
Dot1x Status:
Port Control:
Port Auth Status:
Re-Authentication:
Untagged VLAN id:
Guest VLAN:
Guest VLAN id:
Auth-Fail VLAN:
Auth-Fail VLAN id:
Auth-Fail Max-Attempts: 3
Tx Period:
Quiet Period:
ReAuth Max:
Supplicant Timeout:
Server Timeout:
Re-Auth Interval:
Max-EAP-Req:
Auth Type:
Auth PAE State:
Backend State:
Dell#
Example (mac-
Dell#show dot1x interface tengig 2/21 mac-address
address)
00:00:01:00:07:00
802.1x information on Te 2/21:
-----------------------------
Dot1x Status:
Port Control:
Re-Authentication:
200
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Added the mac-address option on the C-Series and S-
Series.
Introduced on the C-Series, E-Series, and S-Series.
Enable
AUTO
UNAUTHORIZED
Disable
None
Enable
10
Enable
11
30 seconds
60 seconds
2
30 seconds
30 seconds
3600 seconds
2
SINGLE_HOST
Initialize
Initialize
Enable
AUTO
Disable
802.1X