Banner Motd - Dell Z9500 Reference Manual

This is the banner
Dell>
Related

banner motd

Commands
banner exec
banner motd
Set a message of the day (MOTD) banner.
Syntax
banner motd c line c
To delete a Message of the Day banner, enter no banner motd.
Parameters
c
line
Defaults No banner is configured.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series
Usage After entering the banner login command, type one or more spaces and a
Information delineator character. Enter the banner text then the second delineator character.
When the user is connected to the router, if a message of the day banner is
configured, it displays first. If no message of the day banner is configured, the login
90
— sets a Message of the Day banner.
— enables the display of a text string when you enter EXEC mode.
Enter a delineator character to specify the limits of the text
banner. The delineator is a percent character (%).
Enter a text string for your MOTD banner the message with
your delineator. The delineator is a percent character (%).
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command
Control and Monitoring