Dell Z9500 Reference Manual page 369

ipv4 multicast
ipv4 unicast
ipv6 unicast
ipv4-address
mask
ipv6–address
mask
filter-list as-
path-name
regexp regular-
expression
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Border Gateway Protocol
(OPTIONAL) Enter the keyword ipv4 followed by the
keyword multicast to clear information related only to
ipv4 multicast routes.
(OPTIONAL) Enter the keyword ipv4 followed by the
keyword unicast to clear information related only to ipv4
unicast routes.
(OPTIONAL) Enter the keyword ipv6 followed by the
keyword unicast to clear information related only to ipv6
unicast routes.
(OPTIONAL) Enter an IPv4 address in dotted decimal format
and the prefix mask in slash format (/x) to reset only that
prefix.
(OPTIONAL) Enter the IPv6 address followed by the network
mask to reset only that prefix.
(OPTIONAL) Enter the keywords filter-list then the
name of a configured AS-PATH list.
(OPTIONAL) Enter the keyword regexp then regular
expressions. Use one or a combination of the following:
• . = (period) any single character (including a white
space).
• * = (asterisk) the sequences in a pattern (0 or more
sequences).
• + = (plus) the sequences in a pattern (1 or more
sequences).
• ? = (question mark) sequences in a pattern (either 0 or 1
sequences).
NOTE: Enter an escape sequence (CTRL+v) prior to
entering the ? regular expression.
• [ ] = (brackets) a range of single-character patterns.
• ( ) = (parenthesis) groups a series of pattern elements
to a single element.
• { } = (braces) minimum and the maximum match count.
• ^ = (caret) the beginning of the input string. If you use
the caret at the beginning of a sequence or range, it
matches on everything BUT the characters specified.
• $ = (dollar sign) the end of the output string.
369