Set Metric - Dell Z9500 Reference Manual

Parameters
value
Defaults Not configured.
Command ROUTE-MAP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
6.1.1.0
Usage The set local-preference command changes the LOCAL_PREF attribute for
Information routes meeting the route map criteria. To change the LOCAL_PREF for all routes,
use the bgp default local-preference command.
Related bgp default local-preference
Commands routes.

set metric

To assign a new metric to redistributed routes, configure a filter.
Z9500
Syntax
set metric [+ | -] metric-value
To delete a setting, enter no set metric.
Parameters
+
-
metric-value
Access Control Lists (ACL)
Enter a number as the LOCAL_PREF attribute value. The
range is from 0 to 4294967295.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— changes the default LOCAL_PREF attribute for all
(OPTIONAL) Enter + to add a metric-value to the
redistributed routes.
(OPTIONAL) Enter - to subtract a metric-value from the
redistributed routes.
Enter a number as the new metric value. The range is from
zero (0) to 4294967295.
311