Upgrade Fpga-Image Linecard Booted - Dell Z9500 Reference Manual

upgrade fpga-image linecard booted

Use this command to upgrade the FPGA and CPLD devices in Z9500 line-card CPUs using the currently
running Dell Networking operating-system image (and only when required by the upgrade procedure in
the Z9500 release notes).
Z9500
Syntax
upgrade fpga-image linecard {slot-id | all} booted
Parameters
linecard slot-id
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
9.0.0.0
Example
Dell# upgrade fpga-image linecard all booted
Current FPGA information in the system:
=======================================
Card
---------------------------------------------------------------
---------
Linecard0
Linecard1
***************************************************************
********
* Warning - Upgrading FPGA is inherently risky and should
* only be attempted when necessary. A failure at this upgrade
may
* cause a board RMA. Proceed with caution !
***************************************************************
********
***************************************************************
********
* When the upgrade has successfully completed, the system will
be
* automatically rebooted to reload the upgraded
components.
***************************************************************
********
File Management
Enter the slot ID number to specify the line-card CPU to
upgrade. The range of Z9500 slot IDs is 0 to 2. Enter
linecard all to upgrade all Z9500 line cards.
Description
Introduced on the Z9500.
Introduced on the Z-Series.
FPGA Name
PORTCARD CPLD
PORTCARD CPLD
*
*
*
Current Version
0xac 0xb2
0xab
New Version
0xb2
*
*
79