Clear Pfc Counters Sfm Backplane All; Pfc No-Drop Queues - Dell Z9500 Reference Manual

Usage If you do not use the statistics parameter, both hardware and DCBx counters
Information
clear.

clear pfc counters sfm backplane all

Clear the PFC counters on sfm and backplane ports.
Syntax
clear pfc counters sfm <0-5/all> backplane all
Parameters
backplane all
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
Usage
If you do not use the statistics parameter, both hardware and DCBx counters clear.
Information

pfc no-drop queues

Configure the port queues that still function as no-drop queues for lossless traffic.
Syntax
pfc no-drop queues queue-range
To remove the no-drop port queues, use the no pfc no-drop queues
command.
Parameters
queue-range
Defaults No lossless queues are configured.
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
580
Enter the keywords all backplane all to clear the counters on
all interfaces.
Description
Introduced on the Z9500.
Enter the queue range. Separate the queue values with a
comma; specify a priority range with a dash; for example,
pfc no-drop queues 1,3 or pfc no-drop queues 7
or pfc no-drop queues 0,7. The range is from 0 to 3.
Data Center Bridging (DCB)