Bgp Bestpath Med Missing-As-Best; Bgp Client-To-Client Reflection - Dell Z9500 Reference Manual

bgp bestpath med missing-as-best

During path selection, indicate preference to paths with missing MED (MULTI_EXIT_DISC) over those
paths with an advertised MED attribute.
Z9500
Syntax
bgp bestpath med missing-as-best
To return to the default selection, use the no bgp bestpath med missing-as-
best command.
Defaults Disabled
Command ROUTER BGP
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
Usage The MED is a 4-byte unsigned integer value and the default behavior is to assume a
Information missing MED as 4294967295. This command causes a missing MED to be treated
as 0. During the path selection, paths with a lower MED are preferred over those
with a higher MED.

bgp client-to-client reflection

Allows you to enable route reflection between clients in a cluster.
Z9500
Syntax
bgp client-to-client reflection
To disable client-to-client reflection, use the no bgp client-to-client
reflection command.
Defaults Enabled when a route reflector is configured.
Command ROUTER BGP
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
482
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Border Gateway Protocol