Neighbor Advertisement-Interval - Dell Z9500 Reference Manual

Parameters
ipv6-address
peer-group-
name
activate
Defaults Disabled.
Command ROUTER BGPV6-ADDRESS FAMILY
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
Usage By default, when you create a neighbor/peer group configuration in the Router
Information BGP context, it is enabled for the IPv6/Unicast AFI/SAFI. By using activate in the
new context, the neighbor/peer group is enabled for AFI/SAFI.

neighbor advertisement-interval

Set the advertisement interval between BGP neighbors or within a BGP peer group.
Z9500
Syntax
neighbor {ipv6-address | peer-group-name} advertisement-
interval seconds
To return to the default value, use the no neighbor {ipv6-address | peer-
group-name} advertisement-interval command.
Parameters
ipv6-address
peer-group-
name
seconds
510
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Identify a peer group by name.
Enter the keyword activate to enable the identified
neighbor or peer group in the new AFI/SAFI.
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
Enter a number as the time interval, in seconds, between
BGP advertisements. The range is 0 to 600 seconds. The
default is 5 seconds for internal BGP peers and 30 seconds
for external BGP peers.
Border Gateway Protocol