Util-Threshold Cpu - Dell Z9500 Reference Manual

Command CONFIGURATION
Modes
Command
Version
History
9.2(1.0)
8.1.1.0
7.5.1.0
Usage Trace log information is uploaded to flash:/TRACE_LOG_DIR.
Information

util-threshold cpu

Configure the high or low CPU utilization thresholds for SNMP traps.
Z9500
Syntax
util—threshold cpu {5sec | 1min | 5min} {cp |rp | linecard
slot–id | all} {high {0-100} | low {0-100}}
Parameters
cpu-utilization-
time
cp
rp
linecard slot-id
all
{{high | low}
cpu-utilization-
threshold-
percentage}
176
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Enter one of the following values to configure the threshold
level for the time in which a Z9500 CPU can be used:
• 5sec
• 1min
• 5min
Enter the keyword cp to configure the CPU utilization time
for the Control Processor CPU.
Enter the keyword rp to configure the CPU utilization time
for the Route Processor CPU.
Enter the slot ID of the line card for which you want to
configure the CPU utilization time. The range of Z9500 slot
IDs is from 0 to 2.
Enter the keyword all to configure the CPU utilization time
on all Z9500 CPUs: Control Processor, Route Processor, and
line cards.
Enter a percentage value to configure the high or low
threshold level for the time in which a Z9500 CPU can be
used. The percentage of CPU use ranges from 0 to 100.
NOTE: A threshold level of 0 will disable Syslog and
SNMP traps.
Control and Monitoring