Related
diag
Commands
online
online system
Reload a switch after running offline diagnostic tests.
Z9500
Syntax
online system
Defaults
none
Command
EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.7.1.0
Usage
This command is used to manually reset or reboot the system when diagnostics
Information
complete.
Related
diag
Commands
offline
show diag
Display results of offline diagnostic tests on a switch.
Z9500
Syntax
show diag {all | {{cp | rp | linecard} unit-id} [summary |
detail]
630
— run diagnostic tests on an offline switch.
stack-unit— reload the system after running offline diagnostic tests.
Description
Introduced on the Z9500.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
— run diagnostic tests on an offline switch.
stack-unit— bring the system offline to run diagnostic tests.
Debugging and Diagnostics