Deny Bandwidth - Dell Z9500 Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage
The default-metric command in BGP sets the value of the BGP
Information
MULTI_EXIT_DISC (MED) attribute for redistributed routes only.
Related
bgp always-compare-med
Commands
redistribute

deny bandwidth

Enables you to specify link band width extended-community attribute as the matching criteria to deny
incoming or outgoing traffic.
Syntax
deny bandwidth
To disable this setting, enter the no deny bandwidth command.
Parameters
bandwidth
Defaults N/A
Command EXTENDED COMMUNITY LIST
Modes
Command
Version
History
9.7(0.0)
Related permit bandwidth
Commands matching criteria to permitting incoming or outgoing traffic..
380
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
— enables comparison of all BGP MED attributes.
— redistributes routes from other routing protocols into BGP.
Enter the keyword bandwidth to specify extended-
community attribute as the matching criteria for denying
traffic. The range is from 0 to 102400.
Description
Introduced on the S-Series.
– specify link band width extended-community attribute as the
Border Gateway Protocol