Disable - Dell Z9500 Reference Manual

Version
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0

disable

Globally disable GVRP.
Z9500
Syntax
disable
To re-enable GVRP, use the no disable command.
Defaults Enabled.
Command CONFIGURATION-GVRP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
Related
gvrp enable
Commands
protocol gvrp
766
Description
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on C-Series, E-Series, and S-Series
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on C-Series, E-Series, and S-Series
— enables GVRP on physical interfaces and LAGs.
— access GVRP protocol.
GARP VLAN Registration (GVRP)