Show Ip Igmp Ssm-Map - Dell Z9500 Reference Manual

show ip igmp ssm-map

Display is a list of groups that are currently in the IGMP group table and contain SSM mapped sources.
Z9500
Syntax
show ip igmp [vrf vrf-name] ssm-map [group]
Parameters
vrf vrf-name
group
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Example
Dell#show ip igmp ssm-map
Interface
Group
Uptime
Expires
Router mode
Last reporter
Group source list
Source address
65.0.0.1
65.0.0.2
Internet Group Management Protocol (IGMP)
IGMP querying router is 35.0.0.1 (this system)
IGMP version is 2
(OPTIONAL) Enter the keyword vrf followed by the name of
the VRF to configure this setting on that VRF.
(OPTIONAL) Enter the multicast group address in the form
A.B.C.D to display the list of sources to which this group is
mapped.
EXEC
EXEC Privilege
Description
Added support for VRF. Introduced on the S6000-ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
NOTE: Applies to specific VRF if input is provided, else
applies to Default VRF.
Vlan 20
232.1.1.5
00:11:22
Never
INCLUDE
35.0.0.2
Expires
00:01:22
00:01:22
791