Bfd Disable - Dell Z9500 Reference Manual

You can only enable BFD for VRRP in INTERFACE command mode (vrrp bfd
all-neighbors).
Related
show bfd neighbors
Commands
specified interface.
neighbor bfd disable
BGP peer group.

bfd disable

Disable BFD on an interface.
Z9500
Syntax
bfd disable
Re-enable BFD using the no bfd disable command.
Defaults BFD is disabled by default.
Command VRRP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
9.2(0.0)
9.0.0.0
8.3.19.0
8.2.1.0
7.6.1.0
7.5.1.0
Bidirectional Forwarding Detection (BFD)
— displays BFD neighbor information on all interfaces or a
— explicitly disables a BFD session with a BGP neighbor or a
Description
Introduced on the Z9500.
Introduced on S4810.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced on the E-Series.
325