Clear Hardware Vlan-Counters; Remote-Exec - Dell Z9500 Reference Manual

clear hardware vlan-counters

Clear VLAN statistics.
Syntax
clear hardware vlan-couters vlan-id
Parameters
vlan-id
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.7(0.0)

remote-exec

Debug and troubleshoot switch hardware using remote commands.
WARNING: Use the remote-exec command only with the guidance of an engineer from Dell
Networking Technical Support.
Z9500
Syntax
remote-exec {cp | rp | linecard slot-id} hw-command
Parameters
cp
rp
linecard slot-id
hw-command
Defaults none
644
Enter the interface VLAN number. The range is from 1 to
4094.
Description
Introduced on the S6000-ON.
Introduced this command.
Enter the keyword cp to troubleshoot Control Processor
CPU operation.
Enter the keyword rp to troubleshoot Route Processor CPU
operation.
Enter the linecard slot-id to troubleshoot line-card
CPU operation. The range of line-card slot IDs is from 0 to 2.
Each line-card CPU processes packets on the corresponding
Z9500 line card.
Enter the debug command that Dell Networking Tech
Support gives you.
Debugging and Diagnostics