Show System - Dell Z9500 Reference Manual

ACL
OSPF
PIM
IGMP
SNMP
EVTTERM
MRTM
DSM
LACP
DHCP
V6RAD
Unidentified Client0 0x006e0002 0x00000000 0x00000000
0x00000000 0
Dell#

show system

Display operational information on all ports or a specified line card.
Z9500
Syntax
show system [brief | linecard slot-id]
Parameters
brief
linecard slot-id
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.4
8.3.11.1
8.3.7.0
160
0 0x00000000 0x00000000 0x867f50c3 0x000f0218 44
0 0x00000dfa 0x00400098 0x00000000 0x00000000 0
0 0x000000f3 0x00030000 0x00000000 0x00000000 0
0 0x000e027f 0x00000000 0x00000000 0x00000000 0
0 0x00000000 0x00000000 0x800302c0 0x00000002 30
0 0x00000000 0x00000000 0x800002c0 0x00000000 29
0 0x00000000 0x00000200 0x81f7103f 0x00000000 38
0 0x00000000 0x00000000 0x80771003 0x00000000 32
0 0x00000000 0x00000000 0x8000383f 0x00000000 35
0 0x00000000 0x00000000 0x800000c2 0x0000c000 37
0 0x00000433 0x00030000 0x00000000 0x00000000 0
(OPTIONAL) Enter the keyword brief to view an
abbreviated list of system information.
(OPTIONAL) Enter the keyword linecard and a slot number
to identify the switch ports. The slot ID range is from 0 to 2.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
The brief parameter no longer displays the current Reload
mode. To display Reload mode, use the show reload-
type command. Modified the show system stack-unit
command output to support Piece Part ID (PPID).
Introduced on the Z9000.
Introduced on the S4810.
Control and Monitoring