Bfd Interval - Dell Z9500 Reference Manual

Version
9.2(1.0)
9.0.0.0
8.3.19.0
8.3.10.0
8.2.1.0
7.6.1.0
7.4.1.0

bfd interval

Specify non-default BFD session parameters beginning with the transmission interval.
Z9500
Syntax
bfd interval interval min_rx min_rx multiplier value role
{active | passive}
Parameters
interval
milliseconds
min_rx
milliseconds
multiplier value
role [active |
passive]
Defaults Refer to Parameters.
Command INTERFACE
Modes
Bidirectional Forwarding Detection (BFD)
Description
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the keywords interval to specify non-default BFD
session parameters beginning with the transmission interval.
The range is from 50 to 1000. The default is 100.
Enter the keywords min_rx to specify the minimum rate at
which the local system would like to receive control packets
from the remote system. The range is from 50 to 1000. The
default is 100.
Enter the keywords multiplier to specify the number of
packets that must be missed in order to declare a session
down. The range is from 3 to 50. The default is 3.
Enter the role that the local system assumes:
• Active — The active system initiates the BFD session.
Both systems can be active for the same session.
• Passive — The passive system does not initiate a
session. It only responds to a request for session
initialization from the active system.
The default is Active.
327