Ipv6 Dhcp Snooping; Ip Dhcp Snooping Binding - Dell Z9500 Reference Manual

Related ip dhcp snooping vlan
Commands

ipv6 dhcp snooping

Enable DHCPv6 snooping globally for ipv6.
Syntax
[no] ipv6 dhcp snooping
To disable the snooping globally, use the no ipv6 dhcp snooping command.
Defaults Disabled
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)

ip dhcp snooping binding

Create a static entry in the DHCP binding table.
Z9500
Syntax
[no] ip dhcp snooping binding mac address vlan-id vlan-id ip
ip-address interface type slot/port lease number
Parameters
mac address
vlan-id vlan-id
ip ip-address
interface type
slot/port
lease time
Dynamic Host Configuration Protocol (DHCP)
— enables DHCP snooping on one or more VLANs.
Description
Introduced on the S4810, S4820T, S6000 and Z-Series.
Enter the keyword mac then the MAC address of the host to
which the server is leasing the IP address.
Enter the keywords vlan-id then the VLAN to which the
host belongs. The range is from 2 to 4094.
Enter the keyword ip then the IP address that the server is
leasing.
Enter the keyword interface then the type of interface to
which the host is connected:
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE.
Enter the slot and port number of the interface.
Enter the keyword lease then the amount of time the IP
address are leased. The range is from 1 to 4294967295.
699