Clear Ip Igmp Snooping Groups; Debug Ip Igmp Snooping - Dell Z9500 Reference Manual

clear ip igmp snooping groups

Clear snooping entries from the group cache table.
Z9500
Syntax
clear ip igmp snooping groups [group-address interface |
interface]
Parameters
group-address
interface
interface
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
Usage IGMP commands accept only non-VLAN interfaces — specifying VLAN does not
Information yield results.

debug ip igmp snooping

Enable debugging of IGMP snooping packets on interfaces and groups.
Z9500
Syntax
debug ip igmp snooping [group address | interface]
•
•
Parameters
snooping
Internet Group Management Protocol (IGMP)
(OPTIONAL) Enter the IP multicast group address in dotted
decimal format.
Enter the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel then a number.
Description
Introduced on S-Series and Z–Series.
To disable debugging of IGMP snooping, use the no debug ip igmp
snooping [group address | interface] command.
To disable all debugging, use the undebug all command.
Enter the keyword snooping to enable debugging of IGMP
snooping.
793