Show Arp - Dell Z9500 Reference Manual

Related
interface ManagementEthernet
Commands
(either the Primary or Standby RPM).
duplex (Management)
speed (Management interface)

show arp

Display the ARP table.
Z9500
Syntax
show arp [interface interface | ip ip-address [mask] |
macaddress mac-address [mac-address mask]] [retries] [static |
dynamic] [inspection {database | statistics][summary]
Parameters
interface
interface
ip ip-address
mask
inspection
macaddress
mac-address
mask
static
IPv4 Routing
— configures the Management port on the system
— sets the mode of the Management interface.
— sets the speed for the Management interface.
(OPTIONAL) Enter the following keywords and slot/port or
number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For the Management interface on the stack-unit, enter
the keyword ManagementEthernet then the slot/port
information. The slot range is from 0 to 1. The port range
is 0.
• For a port channel interface, enter the keywords port-
channel then a number. The range is from 1 to 512.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
(OPTIONAL) Enter the keyword ip then an IP address in the
dotted decimal format. Enter the optional IP address mask in
the slash prefix format (/ x).
Enter the keyword inspection with one of the following
keywords to view ARP entries:
• database — view a list of ARP entries learned using DAI
• statistics — view DAI statistics
(OPTIONAL) Enter the keyword macaddress then a MAC
address in nn:nn:nn:nn:nn:nn format. Enter the optional
MAC address mask in nn:nn:nn:nn:nn format also.
(OPTIONAL) Enter the keyword static to view entries
entered manually.
929