Show Ip Bgp Extcommunity-List - Dell Z9500 Reference Manual

AfNetCtxAddrlen 255
AfNwCtxAddr 1101112443 : AfNwCtxAddrlen 255 : AfNetBKDrRttP
0x41a0d500 :
AfNetBKDRCnt 0 : AfDampHLife 0
AfDampReuse 0 : AfDampSupp 0 : AfDampMaxHld 0 : AfDampCeiling
0 : AfDampRmapP

show ip bgp extcommunity-list

View information on all routes with Extended Community attributes.
Z9500
Syntax
show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6
unicast] extcommunity-list [list name]
Parameters
vrf vrf-name
ipv4 multicast
ipv4 unicast
ipv6 unicast
list name
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.4.(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
436
(OPTIONAL) Enter the keywords vrf and then the name of
the VRF to view information on all routes with extended
community attributes corresponding to that VRF.
(OPTIONAL) Enter the keyword ipv4 followed by the
keyword multicast to view information related only to ipv4
multicast routes.
(OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
(OPTIONAL) Enter the keyword ipv6 followed by the
keyword unicast to view information related only to ipv6
unicast routes.
Enter the extended community list name you wish to view.
The range is 140 characters.
EXEC
EXEC Privilege
Description
Added the ipv4 multicast and ipv6 unicast parameters.
Added support for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Border Gateway Protocol