Clear Ip Bgp Dampening - Dell Z9500 Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

bgp recursive-bgp-next-hop

learned by the BGP.

clear ip bgp dampening

Clear information on route dampening and return the suppressed route to the Active state.

clear ip bgp [vrf vrf-name] [ipv4 [multicast | unicast] | ipv6

unicast] [dampening [ipv4-address mask | ipv6–address mask]

vrf vrf-name

ipv4 multicast

ipv4 unicast

ipv6 unicast

Border Gateway Protocol

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the S-Series.

Introduced on the C-Series.

Expanded to include the as-number option.

— disables next-hop resolution through other routes

(OPTIONAL) Enter the keyword vrf and then the name of

the VRF to clear information on route dampening

corresponding to that VRF

NOTE: You can use this attribute on a specific VRF to

remove history routes corresponding to that VRF. You

can also use this attribute to return the suppressed

routes corresponding to a specific VRF to an active state.

(OPTIONAL) Enter the keyword ipv4 followed by the

keyword multicast to clear the ipv4 multicast routes.

(OPTIONAL) Enter the keyword ipv4 followed by the

keyword unicast to clear the ipv4 unicast routes.

(OPTIONAL) Enter the keyword ipv6 followed by the

keyword unicast to clear the ipv6 unicast routes.