Logging Coredump Server - Dell Z9500 Reference Manual

Version 7.7.1.0
Version 6.5.1.0
Version 6.1.1.0
Usage The kernel core dump can be large and may take up to five to 30 minutes to
Information upload. The system does not overwrite application core dumps so you should
delete them as necessary to conserve space on the flash. If the flash is out of
memory, the core dump is aborted. The system completes the core dump process
and waits until the upload is complete before rebooting the system.
Related

logging coredump server

Commands
logging coredump server
Enable the platform to send application core dumps to an FTP server.
Syntax
logging coredump server {ftp-server | ip-address | ipv6-
address} username (ftp-username | name} password [type] {ftp-
password | password}
Parameters
ftp-server
ip-address
ipv6-address
name
ftp-username
type
password
ftp-password
Debugging and Diagnostics
Restructured the command to accommodate core dumps
for CP. Introduced on the C-Series and S-Series.
Application coredump naming convention enhanced to
include application.
Introduced
– designates a server to upload kernel core-dumps.
Enter the hostname or IP address of the FTP server where
Dell Networking OS sends application core dumps.
Enter the IP address of the target server in dotted decimal
format.
Enter an IPv6 address of the target server, in the x:x:x:x::x
format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Enter a username to access the target server.
Enter the user name to access the target ftp server.
Enter the password type:
• Enter 0 to enter an un-encrypted password.
• Enter 7 to enter a password that has already been
encrypted using a Type 7 hashing algorithm.
Enter a password to access the target server.
Enter the password of the target ftp server where the
application core dump files will be uploaded. The password
can be up to 15 alphanumeric characters; no special
characters are allowed.
625