Match As-Path - Dell Z9500 Reference Manual

Command ROUTE-MAP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.11.1
8.3.7.0
8.1.1.0
7.7.1.0
Related route-map
Commands

match as-path

To match routes that have a certain AS number in their BGP path, configure a filter.
Z9500
Syntax
match as-path as-path-name
To delete a match AS path filter, use the no match as-path as-path-name
command.
Parameters
as-path-name
Defaults Not configured.
Command ROUTE-MAP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
Access Control Lists (ACL)
Description
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced.
— enables a route map.
Enter the name of an established AS-PATH ACL, up to 140
characters.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
293